Description
JB8444-874G METAL AIR-OPERATED PUMP
Features:
1/4in FNPT air inlet
1/2in liquid inlet
1/2in liquid discharge
FNPT/FBSPT (threaded) connection
6.4 in max depth
15 GPM max flow
JB8444-874G METAL AIR-OPERATED PUMP
JB8444-874G METAL AIR-OPERATED PUMP
Features:
1/4in FNPT air inlet
1/2in liquid inlet
1/2in liquid discharge
FNPT/FBSPT (threaded) connection
6.4 in max depth
15 GPM max flow
Related products
-
JB735FD-753RC LINED-MAGNETIC-DRIVE-PUMP
JB735FD-753RC LINED-MAGNETIC-DRIVE-PUMP Ambient temperature range: 32 to 104°C (0 to 40°C) Maximum operating temperature: up to 300°F Ambient humidity range: 35 to 85% RH Maximum capacity: 350 GPM Maximum head: 350ft Corrosion resistant ETFE and PFA internals Non-contact bearing system Spline/pinned impeller design Motor sold separately -
JB534R-U7822G SINGLE-IMPELLER CENTRIFUGAL ELECTRIC PUMPS WITH MCE/P INVERTER
JB534R-U7822G SINGLE-IMPELLER CENTRIFUGAL ELECTRIC PUMPS WITH MCE/P INVERTER Operating range: from 6 to 100 m3/h with head up to 60 metres. Liquid temperature range: from -15 °C to +80 °C for the other pumps. Pumped liquid: clean, free of solids and abrasives, non-viscous, non aggressive, non-crystallised and chemically neutral, with properties similar to water. Maximum ambient temperature: +40 °C. Maximum operating pressure: 10 bar (1000 kPa) Protection class at the terminal board: IP 55. Protection class: IP 44 Insulation class: F. Installation: normally in horizontal or vertical position, provided that the Motor is always above the pump. -
JB745-BY662 HIGH PRESSURE HYDRO SEEDING PUMPS
JB745-BY662 HIGH PRESSURE HYDRO SEEDING PUMPS Features: Sand cast aluminum construction with cast iron wear parts EPDM/EPR mechanical seal, O-rings, and gaskets 3in or 4in NPT suction/discharge ports Available with Honda E-start gasoline engine Discharge ports rotate in 180° increments Low suction and high suction options available Maximum head: up to 202ft Maximum flow: up to 560 GPM -
JB7746G-BY563T MP MAGNETIC-DRIVE-PUMP
JB7746G-BY563T MP MAGNETIC-DRIVE-PUMP Features 316 stainless steel construction Maximum capacity: up to 340 GPM Maximum head: up to 298ft Single gasket seal Silicon carbide-D bearings Pump sizes between 1in x 3/4in to 2in x 1in Temperature range: -22 to 302°F ASME 150# or JIS Flange options available Meets most sub-ANSI applications Motor sold separately
