Uncategorized
Showing all 7 results
-
JB30992T-64R7 AIR OPERATED DIAPHRAGM PUMP
JB30992T-64R7 AIR OPERATED DIAPHRAGM PUMP Features 125 PSI maximum air inlet pressure 1 FNPT, BSP suction (bottom) 1 FNPT, BSP discharge (top) Neoprene, Buna-N, Santoprene, Viton, EPR, and Teflon elastomers Polypropylene or Kynar pump material -
JB74002-746T SUBMERSIBLE AUTOMATIC WATER PUMP
JB74002-746T SUBMERSIBLE AUTOMATIC WATER PUMP Description Liquid temperature up to 35°C (for home use according to EN 60335-2-41) Max. liquid temperature: 35°C (for other uses)- Maximum immersion depth 5 mt.- Min. suction level 40 mm- Continuous duty MOTOR- Single-phase 230V-50Hz (with floater)- Three-phase 400V-50Hz- Mechanical seal in oil bath- Permanent split capacitor- Insulation Class F- Protection IP 68 MATERIALS- Handle - Motor casing - Pump body - Impeller - Suction grid - Shaft with rotor - Mechanical seal Stainless Steel AISI 304+Nylon Stainless Steel AISI 304 Stainless Steel AISI 304 Stainless Steel AISI 304 Stainless Steel AISI 304 Stainless Steel AISI 304 Silicon/Silicon/NBR -
JB7827-HT725 METALLIC CLAMPED AIR OPERATED PUMP
JB7827-HT725 METALLIC CLAMPED AIR OPERATED PUMP Features 125 PSI maximum air inlet pressure 1-1/2 FNPT, BSP suction (bottom) 1-1/2 FNPT, BSP discharge (top) Neoprene, Buna-N, Santoprene, EPR, Viton, and Teflon elastomers Aluminum, Cast Iron, or Stainless Steel pump material -
JB837L-8714X METALLIC AIR OPERATED PUMP
JB837L-8714X METALLIC AIR OPERATED PUMP Features 125 PSI maximum air inlet pressure 1 FNPT, BSP suction (bottom) 1 FNPT, BSP discharge (top) Neoprene, Buna-N, Santoprene, Viton, EPR, and Teflon elastomers Aluminum, cast iron, or stainless steel pump material -
JB8467-92511 CLOSE COUPLED PUMP
JB8467-92511 CLOSE COUPLED PUMP Cast iron construction Suction: up to 10in Discharge: up to 8in Flow: up to 4190 GPM Enclosed, stainless steel impeller Motor: Electric, 1800/3600 RPM 3 phases up to 200 HP Lead free bronze wear rings Fluid temperature: up to 225°F -
JB893-963L SELF-PRIMING FREE SHAFT PUMP
JB893-963L SELF-PRIMING FREE SHAFT PUMP Features Pump type: final suction Free shaft coupling Casing & impeller: cast iron Mechanical seal: ceramic / carbon / Buna-N Steel fittings Suction/discharge diameter: 1-1/2 to 10in NPT Electric motor options: Up through 15 HP: 3450 RPM, 2 poles Up through 30 HP: 1150 RPM, 6 poles Up through 60 HP: 1750 RPM, 4 poles Fluid temperature: up to 70°C -
JB904-8493H CENTRIFUGAL PUMP
JB904-8493H CENTRIFUGAL PUMP 20 GPM maximum flow (CPVC impeller) 165ft maximum head 160°F maximum temperature (CN, BN, CS) 300°F maximum temperature (BS) 6in maximum impeller diameter Discharge 3/4in FNPT, Suction 3/4in FNPT NEMA 56J Footless motor (multiple enclosures available)
