PUMP
Showing all 20 results
-
JB3873-Y64S CAST IRON STAINLESS FITTED CLOSE COUPLED PUMP
JB3873-Y64S CAST IRON STAINLESS FITTED CLOSE COUPLED PUMP Available at 1,800 or 3,600 RPM 2.5 to 5in, 125lb ANSI Flange suction 2 to 4in, 125lb ANSI Flange discharge 225°F continuous liquid temperature 1 or 3 phase motors available 175 PSI case working pressure Bronze C95200 casing wear ring Cast iron ASTM A48 motor bracket Stainless steel AISI420 Bronze C95200 shaft sleeve Mechanical seal: Carbon/Ni-Resist/Buna-N 5 to 9in impeller sizes -
JB397T-7836 SERIES-PUMP
JB397T-7836 SERIES-PUMP Features 1425 gpm maximum flow 475 ft at 206 psi with water maximum head 100 HP maximum power 150lb RF flange connection C-PTFE or optional SiC-Z bearing SiC shaft GFR-PTFE casing gasket 150psig at 250ºF Enclosed impeller 3550 rpm speed Neodymium magnets -
JB534R-U7822G SINGLE-IMPELLER CENTRIFUGAL ELECTRIC PUMPS WITH MCE/P INVERTER
JB534R-U7822G SINGLE-IMPELLER CENTRIFUGAL ELECTRIC PUMPS WITH MCE/P INVERTER Operating range: from 6 to 100 m3/h with head up to 60 metres. Liquid temperature range: from -15 °C to +80 °C for the other pumps. Pumped liquid: clean, free of solids and abrasives, non-viscous, non aggressive, non-crystallised and chemically neutral, with properties similar to water. Maximum ambient temperature: +40 °C. Maximum operating pressure: 10 bar (1000 kPa) Protection class at the terminal board: IP 55. Protection class: IP 44 Insulation class: F. Installation: normally in horizontal or vertical position, provided that the Motor is always above the pump. -
JB63T54-735FV STANDARDISED CENTRIFUGAL ELECTRIC PUMPS WITH INVERTER
JB63T54-735FV STANDARDISED CENTRIFUGAL ELECTRIC PUMPS WITH INVERTER Rotation speed: 1450 - 2900 1/min. Operating range: from 1 to 470 m3/h with head up to 63 metres. Liquid temperature range: from -10 °C to +140 °C (MCE/C) Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, non-crystallised and chemically neutral, with properties similar to water. Maximum ambient temperature: +40 °C. Maximum operating pressure: 16 bar - 1600 kPa (for DN 200 max 10 bar). Protection class: IP 55. Insulation class: F. Flanging: PN 16 DIN 2533. PN 10 DIN 2532 for DN 200. Installation: normally in the horizontal position -
JB65R-TY674 SELF-PRIMING PUMPS
JB65R-TY674 SELF-PRIMING PUMPS 220 GPM (50 m3/h) max capacity 164ft (50m)max total head 60 HP max output VFD compatible Materials of construction: Metallic materials (wetted components): 304SS, 316SS, 316LSS, Hastelloy C4, C276 Insulation materials: H, C, Super-C Gasket: PTFE, metal spiral wound Flange standards available: ANSI, ASME, HG, DIN, JIS, GB, SH Thrust balanced impeller HPB monitoring options: Local monitoring Remote panel mounting output Connect to existing PLC or DCS through 4-20mA digital signal API 685 design Standard explosion-proof terminal box -
JB7200-7388H NON-SEAL CANNED MOTOR PUMP
JB7200-7388H NON-SEAL CANNED MOTOR PUMP Features 255 gallon/minute flow rate 280 foot maximum head 2-pole, max 29 hp motor power -76 to 752°F (-60 to 400°C) temperature range ANSI 300# ASME B73.3 -
JB72R-VB672 CLOSE-COUPLED CENTRIFUGAL PUMPS WITH OPEN IMPELLER
JB72R-VB672 CLOSE-COUPLED CENTRIFUGAL PUMPS WITH OPEN IMPELLER Construction: Close-coupled centrifugal pumps with open impeller. Free-flow impeller (vortex or recessed impeller) for type C 16/1E. C: version with pump casing and lanter bracket in cast iron. B-C: version with pump casing and lanter bracket in bronze (the pumps are supplied fully painted). Applications For moderately dirty liquids or emulsions. For industry and agriculture. Operating conditions Liquid temperature from -10 °C to +90 °C. Ambient temperature up to 40 °C. Total suction lift up to 8 m. Maximum permissible working pressure: 6 bar. Maximum size of sol Special executions on requests: alternative voltages and frequencies. -
JB734-902RF CENTRIFUGAL ELECTRIC PUMPS WITH INVERTER
JB734-902RF CENTRIFUGAL ELECTRIC PUMPS WITH INVERTER Rotation speed: 1450 - 2900 1/min. Operating range: From 1 to 470 m3/h with head up to 72 metres. Liquid temperature range: From -10 °C to +140 °C (MCE/C) From -10 °C to +80 °C (MCE/P) Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, non-crystallised and chemically neutral, with properties similar to water. Installation: normally in horizontal or vertical position, provided that the Motor is always above the pump. Maximum ambient temperature: +40 °C. Maximum operating pressure: 16 bar - 1600 kPa (for DN 200 max 10 bar). Insulation class: F. Flanging: PN 16 DIN 2533. -
JB735FD-753RC LINED-MAGNETIC-DRIVE-PUMP
JB735FD-753RC LINED-MAGNETIC-DRIVE-PUMP Ambient temperature range: 32 to 104°C (0 to 40°C) Maximum operating temperature: up to 300°F Ambient humidity range: 35 to 85% RH Maximum capacity: 350 GPM Maximum head: 350ft Corrosion resistant ETFE and PFA internals Non-contact bearing system Spline/pinned impeller design Motor sold separately -
JB735P-736FC DIESEL DRIVEN DE WATERING AND SEWAGE PUMP
JB735P-736FC DIESEL DRIVEN DE WATERING AND SEWAGE PUMP Pump specifications: Type .................................. JB735P-736FC Max. flow .......................... 750 US gpm (170 m3/hour) Max. pressure ................... 56 ft. / 24 PSI (17 mwc) Solids handling ................. 3,23" (82 mm) Impeller type ..................... Channel impeller Priming system ................. BBA MP50 Engine .............................. Hatz 1D90E DriveOn® Emission level ................... Tier 4 final Canopy ............................. M10-18 Connections ...................... 4" or 6" Sound level LPA ................. 50 dB(A) at 33 ft. Dry weight ......................... 3223 lbs. (1465 kg) 750 gpm 56ft/24 psic max head 3.23in solids 0.4 gal/hour fuel consumption at BEP Hatz engine 1700 rpm 1500 Drive On hours service interval 4 year warranty -
JB7386-TL724 SINGLE-IMPELLER CENTRIFUGAL PUMP
JB7386-TL724 SINGLE-IMPELLER CENTRIFUGAL PUMP Operating range: from 1,8 to 96 m3/h, with head up to 62 metres. Pumped liquid: clean, free of solids and abrasives, non-viscous, non aggressive, non-crystallised and chemically neutral, with properties similar to water. Liquid temperature range: K 20/41, K 30/70, K 30/100, K 36/100 K 12/200, K 36/200, K 40/200 : Remainder of the range: Maximum ambient temperature: +40°C Maximum operating pressure: from -15 °C to +110 °C Protection class: 7.5 kW : 8 bar (800 kPa) : 10 bar (1000 kPa) IP 44 (IP 55 for 2,2 - 3 - 4 - 5,5 - 7,5 - 9,2 - 11 kW motors) Protection class at the terminal board: IP 55 Insulation class: F Standard voltage: single-phase 220-240 V / 50 Hz three-phase 230-400 V / 50 Hz up to 4 kW included - 400 V ∆ 50 Hz from 5,5 kW Installation: horizontal or vertical position, provided that the motor is always above the pump. -
JB745-BY662 HIGH PRESSURE HYDRO SEEDING PUMPS
JB745-BY662 HIGH PRESSURE HYDRO SEEDING PUMPS Features: Sand cast aluminum construction with cast iron wear parts EPDM/EPR mechanical seal, O-rings, and gaskets 3in or 4in NPT suction/discharge ports Available with Honda E-start gasoline engine Discharge ports rotate in 180° increments Low suction and high suction options available Maximum head: up to 202ft Maximum flow: up to 560 GPM -
JB7746G-BY563T MP MAGNETIC-DRIVE-PUMP
JB7746G-BY563T MP MAGNETIC-DRIVE-PUMP Features 316 stainless steel construction Maximum capacity: up to 340 GPM Maximum head: up to 298ft Single gasket seal Silicon carbide-D bearings Pump sizes between 1in x 3/4in to 2in x 1in Temperature range: -22 to 302°F ASME 150# or JIS Flange options available Meets most sub-ANSI applications Motor sold separately -
JB7846G-87T AIR-OPERATED DOUBLE DIAPHRAGM PUMP
JB7846G-87T AIR-OPERATED DOUBLE DIAPHRAGM PUMP Features Looped C spring valve spool valve type Available in stainless steel, aluminum, cast iron, polypropylene, and PVDF Maximum flow rate: 206.1 GPM Maximum discharge head: 280ft Maximum air consumption: 229.5scfm Certifications available: CE, ATEX, FDA (on select SS models) -
JB8444-874G METAL AIR-OPERATED PUMP
JB8444-874G METAL AIR-OPERATED PUMP Features: 1/4in FNPT air inlet 1/2in liquid inlet 1/2in liquid discharge FNPT/FBSPT (threaded) connection 6.4 in max depth 15 GPM max flow -
JB847-T1111K AIR-OPERATED DOUBLE-DIAPHRAGM PUMP
JB847-T1111K AIR-OPERATED DOUBLE-DIAPHRAGM PUMP Features 3/4in FNPT air inlet 1.5in liquid inlet and outlet ports 120psi max pressure ANSI/DIN (flanged) connection type 1/4in max solids Max suction lift capability: 15 ft-H2O dry 26 ft-H2O wet -
JB872V-YB673 SINGLE-IMPELLER CENTRIFUGAL ELECTRIC PUMPS WITH MCE/P INVERTER
JB872V-YB673 SINGLE-IMPELLER CENTRIFUGAL ELECTRIC PUMPS WITH MCE/P INVERTER Operating range: from 6 to 100 m3/h with head up to 60 metres. Liquid temperature range: from -15 °C to +80 °C for the other pumps. Pumped liquid: clean, free of solids and abrasives, non-viscous, non aggressive, non-crystallised and chemically neutral, with properties similar to water. Maximum ambient temperature: +40 °C. Maximum operating pressure: 10 bar (1000 kPa) Protection class at the terminal board: IP 55. Protection class: IP 44 Insulation class: F. Installation: normally in horizontal or vertical position, provided that the Motor is always above the pump -
JB8892-56T43D STANDARD PUMP
JB8892-56T43D STANDARD PUMP Features: 3300 GPM (750 m3/h) max capacity 525ft (160m)max total head 420 HP max output VFD compatible Materials of construction: Metallic materials (wetted components): 304SS, 316SS, 316LSS, Hastelloy C4, C276 Insulation materials: H, C, Super-C Gasket: PTFE, metal spiral wound Flange standards available: ANSI, ASME, HG, DIN, JIS, GB, SH Thrust balanced impeller HPB monitoring options: Local monitoring Remote panel mounting output Connect to existing PLC or DCS through 4-20mA digital signal API 685 design Standard explosion-proof terminal box -
JB9044G-TY4782F CHEMICAL PROCESS PUMP
JB9044G-TY4782F CHEMICAL PROCESS PUMP Back pull-out design Dry run capability Contains ANSI 150# flanged connections Maximum capacity: 55 to 160 GPM Maximum head: 38 to 142ft Liquid temperature range: 14 to 221°F (-10 to 105°C) Maximum operating pressure: 101.5 PSI Motor output: 05. to 5.0 HP options available (motor sold separately) Splined/pinned impeller design -
JBS86-881H PLASTIC AIR-OPERATED PUMP
JBS86-881H PLASTIC AIR-OPERATED PUMP 3/4in FNPT air inlet 2in liquid inlet and discharge ports 160 GPM max flow rate 120psi max pressure 1/4in max diameter solids Max suction lift capability: 17 ft-H2O dry 29 ft-H2O wet
